Tuesday, August 20, 2019

Strategic Management Essay -- essays research papers

Strategic Management QUESTION The study of the external environment is a crucial step in the mapping of business strategy for an organization. Discuss how the assessment of external forces can be performed with business examples to support your analysis. CONTENT PAGE 1. Question Paper 2 2. Introduction 3 3. PEST Analysis 4 (3.1) Political Legal Environment 4 (3.2) Economic Environment 4 (3.3) Social Environment 5 (3.4) Technological Environment 5 4. Industry Analysis 5 5. The Michael Porter Five Forces 6 (5.1) Threat Of New Entrants 7 (5.2) Rivalry of existing firms 7 (5.3) Threats of substitutes 7 (5.4) Bargaining power of buyer 8 (5.5) Bargaining power of suppliers 9 6. Conclusion 9 7. Bibliography 10 8. References 10 Introduction Business environment is an element that will affect all the activities of an organization. Beside, it will bring firms both opportunities and threats because of its uncertainties. Business environment is uncertain, complex & dynamics; organization should apply more flexibility & discontinuity ways to manage them. A firm cannot control the environment because it is unpredictable in its direction and speed of change, such as interest rates, rate of inflation and exchange rate. Business environment can classifies in two categories that are internal environment and external environment. Internal factors close to the company that have a direct impact on the organizations strategy, these factors include employee, customer, suppliers, shareholder, banker etc. External environment comprises those factors and trends outside the organisation that might have an influence upon an organisation and its future. Many external factors can have an effect upon an organisation - from changes in government legislation to the entry of new competition into a market.... ...; more the fact that your supplier realizes you can do it and so needs to respond accordingly Bibliography : http://IMBA 702 Cases.htm Strategic Management and Business Policy Entering 21st Century Global Society (Sixth edition) ?Thomas L. Wheelen & J.David Hunger http://www.Marketing Environment.htm References: Strategic Management and Business Policy Entering 21st Century Global Society (Sixth edition) ?Thomas L. Wheelen & J.David Hunger Business Policy and Strategic Management (Fifth Edition) ?Lawrence R. Jauch & William F.Glueck. Management of Business for GCE A Level & LCCI (2nd Edition) ?Vincent Gabriel Management (Third Edition) ?Kathryn M Bartol & David C Martin Strategic Management Awareness and Chance (Third Edition) ?John L Thompson Strategic Management Theory and Pratice ?G.A.Cole BA MA MIPD MIMgt, Strategic Management (International Edition) ?Alex Miller Gregory G.Dess Strategic Management (McGRAW-HILL International Edition) ?Gregory G.Dess & Alex Miller http://www. Porter's Five Forces.htm http://www.IMBA 702 Cases.htm http://www.Marketing Environment.htm http://www. Business Competition.htm http://Activity 1 - PESTEL analysis.htm

Monday, August 19, 2019

to become a member :: essays research papers

this is it I love you and am sending you a letter tomorrow.I want you to know I am sorry.Please, listen I will give you my address but DO NOT write b/c of parents. I will also give you my # but I will call you.I am sorry.Thank you though for believing in me and trusting me.Your an angel. I am not completely over last nights disagreement and don't want to cause any problems over it. I know what I put you through last night and I understand where you are coming from on the issue but I don't think you know or understand where I stand and what I percieve. I have been in your position several times and know how angry you get and how frusterating it is. But before I always thought like you did, until I got into the opposite position and trust me, it is miserable. Either way I go about it, I am still wrong. It is a long and complicated thing to get over because I can't express my feelings and I can't hold them back either. It will drive me insane if I do and if I don't. What will become of it, i don't know, but I won't stop loving you regardless. I do believe in fate and have for a long time, and whatever you have been thinking about I would like to hear it. I won't mention the arguement again and hopefully I will get over it and we can move on. I have a hair apointment at 11:00 and my wax apointment at 1:00 but hopefully I will be able to send you one more email before tonight. I love you dave honestly but at the moment I am feeling really down and discouraged. Please don'ttake my comments wrong and try to understand. I am sorry and I did overreact but I know you think I appologized for my thoughts and perceptions and that I didn't do. I love you too. I justwant to drop the whole arguement and deal with it by myself. I can work through it and then we can be back to normal. I am really scared of losing you too. But I don't know what to do, or how to do it, and especially not how to cope alone. I will work it out for you, for us, though. I love you and don't forget that.

Sunday, August 18, 2019

Caring for An Angina Patient Essay -- Nursing Essays

Nurses play a very important role in managing a patient from the moment of his admission up to making a discharge plan. Each part of the nursing process is vital to the wellbeing of the person he is taking care of. Clinical reasoning is always essential in each part of the nursing process from assessment, setting up goals and intervention. Effective nursing management is done when a nurse looks for the early and right cues at the right patient and implementing it at the right time. This essay will delve deeper into the case of Rob Geis, a patient who was suffering from angina, given his history and the signs and symptoms he experienced up to the time when his condition worsened to Myocardial Infarction. This essay will also look into how the nurse should provide effective nursing care to the patient with this condition. Etiology and Pathophysiology of Angina Angina is pain felt in the chest area as a result of lack of inadequate supply to the myocardium (Better Health Channel, 2013) Atherosclerosis or the hardening and narrowing of arteries caused by the build-up of plaques, the insufficient supply of oxygen and its increasing demand are some of the factors that can cause ischemia in the myocardium (Lewis et al., 2012). When there is a total blockage of the coronary arteries for a few minutes, the myocardium cannot receive oxygen and glucose for aerobic metabolism thus anaerobic metabolism occurs (Lewis et al., 2012). The lactic acid builds up and stimulates the nerve fibres in the myocardium resulting to chest pain (Lewis et al., 2012). The cells are repaired and the aerobic metabolism and the contractility of the arteries are restored when there is return of blood flow (Lewis et al., 2012) Subjective and Objectiv... ....). New South Wales: Elsevier Australia. MedlinePlus. (2010). Atenolol. Retrieved April 4, 2014, from http://www.nlm.nih.gov/medlineplus/druginfo/meds/a684031.html Rull, G. (2011). Cardiogenic Shock. Retrieved April, 2014, from http://www.patient.co.uk/doctor/Cardiogenic-Shock.htm Smeltzer, S., Bare, B., Farrell, M., & Dempsey, J. (2011). Smeltzer & Bare's Textbook of Medical-Surgical Nursing (2nd Australian and New Zealand edition ed. Vol. 1): Lippincott Williams & Wilkins Pty Ltd. WebMD. (2012). Electrocardiogram. Retrieved April 1, 2014, from http://www.webmd.com/heart-disease/electrocardiogram Williams, B. R., Lewis, D. R., Burgio, K. L., & Goode, P. S. (2012). Next-of-Kin's Perceptions of How Hospital Nursing Staff Support Family Presence Before, During, and After the Death of a Loved One. Journal of Hospice and Palliative Nursing, 14(8), 541-550. Caring for An Angina Patient Essay -- Nursing Essays Nurses play a very important role in managing a patient from the moment of his admission up to making a discharge plan. Each part of the nursing process is vital to the wellbeing of the person he is taking care of. Clinical reasoning is always essential in each part of the nursing process from assessment, setting up goals and intervention. Effective nursing management is done when a nurse looks for the early and right cues at the right patient and implementing it at the right time. This essay will delve deeper into the case of Rob Geis, a patient who was suffering from angina, given his history and the signs and symptoms he experienced up to the time when his condition worsened to Myocardial Infarction. This essay will also look into how the nurse should provide effective nursing care to the patient with this condition. Etiology and Pathophysiology of Angina Angina is pain felt in the chest area as a result of lack of inadequate supply to the myocardium (Better Health Channel, 2013) Atherosclerosis or the hardening and narrowing of arteries caused by the build-up of plaques, the insufficient supply of oxygen and its increasing demand are some of the factors that can cause ischemia in the myocardium (Lewis et al., 2012). When there is a total blockage of the coronary arteries for a few minutes, the myocardium cannot receive oxygen and glucose for aerobic metabolism thus anaerobic metabolism occurs (Lewis et al., 2012). The lactic acid builds up and stimulates the nerve fibres in the myocardium resulting to chest pain (Lewis et al., 2012). The cells are repaired and the aerobic metabolism and the contractility of the arteries are restored when there is return of blood flow (Lewis et al., 2012) Subjective and Objectiv... ....). New South Wales: Elsevier Australia. MedlinePlus. (2010). Atenolol. Retrieved April 4, 2014, from http://www.nlm.nih.gov/medlineplus/druginfo/meds/a684031.html Rull, G. (2011). Cardiogenic Shock. Retrieved April, 2014, from http://www.patient.co.uk/doctor/Cardiogenic-Shock.htm Smeltzer, S., Bare, B., Farrell, M., & Dempsey, J. (2011). Smeltzer & Bare's Textbook of Medical-Surgical Nursing (2nd Australian and New Zealand edition ed. Vol. 1): Lippincott Williams & Wilkins Pty Ltd. WebMD. (2012). Electrocardiogram. Retrieved April 1, 2014, from http://www.webmd.com/heart-disease/electrocardiogram Williams, B. R., Lewis, D. R., Burgio, K. L., & Goode, P. S. (2012). Next-of-Kin's Perceptions of How Hospital Nursing Staff Support Family Presence Before, During, and After the Death of a Loved One. Journal of Hospice and Palliative Nursing, 14(8), 541-550.

Saturday, August 17, 2019

Hris Replacement Essay

Cost Plan Part of project management is the estimation of the project cost. The budget can be derived from the project plan by looking at the following criteria (Marchewka, 2009): * estimated duration of activities, * resources identified and assigned to tasks, and * wages and overtime rate for resources. In addition to hard numbers resource leveling is important. Resource leveling helps with accurately planning a project and will help identify if people are scheduled to have more work than hours in a day. Having too much work assigned to one person is a risk to the project. Figure 2 – Riordan Budget Report illustrates the Riordan HRIS replacement project budget based on the resources allocated to tasks in the project plan. The budget report will be monitored weekly at the beginning of the project and daily as the project progresses. Additional cost factors such as material, facility cost, insurance, and other administrative costs will be added to the project budget cost to establish the overall project budget. Figure 2 – Riordan Budget Report Performance Measurement It is important to not only to establish critical tasks and sub-tasks, but also to identify a means to measure current progress against estimated progress. Without a clear understanding of where the project is in regards to the timeline management is unable to identify potential trouble spots and delays that can drive up costs and derail the project. What Is Performance Measurement The U. S. General Accounting Office (GAO) provides the following definition of Performance Measurement: â€Å"Performance measurement is the ongoing monitoring and reporting of program accomplishments, particularly progress towards pre-established goals. It is typically conducted by program or agency management. Performance measures may address the type or level of program activities conducted (process), the direct products and services delivered by a program (outputs), and/or the results of those products and services (outcomes). A program† may be any activity, project, function, or policy that has an identifiable purpose or set of objectives. †(Performance-Based Management Special Interest Group [(PBM SIG)], 2001, p. 3). When undergoing a project or process there must be a method in place to judge or measure the progress and outcome, which will allow management to make intelligent decisions. Performance Measurement delivers that data management requires by applying a method of evaluating progress toward accomplishing predetermined goals, including information on the efficiency with which resources are transformed into goods and services (PM Solutions Center for Business Practices, 2005). Performance Measurement vs. Value Measurement In measuring performance, program management is trying to gather information to help them make decisions to affect change that, with any luck, will improve that performance. For example, project performance measures are initiated to provide crucial information to managers in order to provide purpose and direction over the project. Those measures must be pertinent and applicable to the organizational level that can immediately effect change based on information it learns in order to control the performance of the project. In measuring value, you are trying to demonstrate that decisions you made to implement change, through project management improvement initiatives, has indeed added value to the organization. This is actually measuring value rather than performance, which may not be the same. While improved performance can be translated into value, value measurement, provide information on the performance of the organization rather than performance of the project. Riordan Project Performance Measures Measurement Construct The Measurement Construct utilized in the Riordan Project is based on the adherence to estimate. Accurate project estimation is crucial in keeping project costs down and stakeholders happy. The Key Performance Indicator project managers want to minimize is expressed by the formula [(E-A)/E], where E = estimated Value to complete project and A = actual Value used to complete project. Project managers can substitute any value into the equation, such as hours or cost, to determine adherence to estimate. This will allow the project management team to spot trends early on during the project and then make the necessary adjustments. To better illustrate this concept figure 2 depicts the subtasks identified as Milestones. The project management has estimated the time required to complete the 1st phase of the project (Project Preparation) would require 10 days. Completion of the phase is signaled by the development of the Statement Of Works. The project management team could measure the performance of the project resources or team members by comparing the actual time required to complete the Milestone against the estimated time to complete the Milestone. Figure 3 – Milestones Figure 2 depicts that the estimated time to complete phase 1 was 10 days. If the actual time required to complete phase 1 was recorded at 12. 5 days the performance measure would be as follows: [(10-12. 5)/12. 5]= -20% This value describes a value of -20% of efficiency of the performance of this task. Ideally the task performance would be 0%; the milestone would have been completed within the time estimated during the project inception. While many may feel it is better to come in under the original estimate, the goal is to optimize resources and organizational assets throughout the project. Over committing assets and resources on one project may have undesirable effects in other areas of the organization. The key is to have exactly the required assets and resources available when required and only when required. Project Baseline The project baseline is set when all of the details for the planned project are set. The project baseline in MS Project ® is set by selecting View > Gantt Chart > Tools > Tracking > Set Baseline > Entire Project (eHow, 2011). The Riordan HRIS replacement project baseline is illustrated in Figure 3 – Riordan HRIS Project Baseline Illustration. Figure 4 – Riordan HRIS Project Baseline Illustration Evaluation Figure 5 – Riordan HRIS Replacement Tracking Sheet Risk Analysis Reporting Project Evaluation and Reporting takes a key role in the process and collection of project information for all members involved in the project to track changes, maintain budgetary requirements, and complete objectives on-time. â€Å"Monitoring the progress of the project allows you to adapt the program as needed to ensure that you attain your objectives.

Friday, August 16, 2019

Lethal Injection: A study of influenza vaccines

Every fall season we hear the question; did you get your flu shot yet? It is supposed to protect you from that nasty flu virus that circulates our communities during the fall and winter months. But, did you know that in 2011 the Centers for Disease Control (CDC) Adverse Event Reporting Systems Website (AERS) reported 51 deaths caused by the flu vaccine in the United States (U. S. ) (CDC,2012).According to National Vaccine Information Center (NVIC), as of July 2012 there have been more than 84,000 reports of adverse reactions, 1000 vaccine related deaths and over 1600 cases of Guillain- Barre syndrome, a acute form of paralysis, triggered by the vaccine (NVIC. ORG). A problem exists in the fact that according to the ( NVIC) fewer than 1% of all adverse vaccine reactions are ever reported, this fact is substantiated by the problem of â€Å"underreporting† vaccine injuries according to the joint operated site by the CDC and Food and Drug Administration ( FDA) (VAERS, 2011).Resear ch claims that receiving the flu vaccine exposes people to a number of dangerous chemicals that have been known to cause multiple side effects, disease conditions, and deaths. The U. S. Government’s public health agency, the CDC, pledges â€Å"to base all public health decisions on the highest quality scientific data openly and objectively derived† (Doshi, 2013, Marketing vaccines, Para 1). Peter Doshi, a postdoctoral fellow at Johns Hopkins University School of medicine, argues that in the case of influenza vaccines and their marketing this is not the case.He believes that the vaccine might be less beneficial and less safe than has been claimed and the threat of influenza appears overstated. Doshi goes on to further question the CDC’s recommendation that the influenza vaccine can only do good, pointing to serious reactions to influenza vaccines in Australia, Finland and Sweden. (British Medical Journal, 2013) Every year scientists travel to Asia and have to gue ss which specific viruses are active and circulating that season and have to chose 3 strains of flu out of the 300+ known documented strains of influenza (flu) viruses.These 3 viruses are then attenuated or weakened and added to the mix of a number of other ingredients, which we will review, to make a flu vaccine. The ingredients listed in influenza vaccines are available in the inserts provided by the vaccine manufacturers and also posted on the CDC’s vaccine Pinkbook website. A few of the ingredients include Thimerosol, 2 Phenoxyethanol, Aluminum, Beta Propiolactone, Ammonium Sulfate, Formaldehyde, Monosodium Glutamate (MSG), Gentamycin Sulfate, Polymixin B and more. The ingredient Thimerosol is used as a preservative in the vaccine.It is 49. 6% mercury by weight and is a powerful neurotoxin. It has been implicated in many heath conditions such as cardiovascular collapse, autism, seizures, mental retardation, hyperactivity, dyslexia and many other central nervous system (CN S) disorders. ( CDC, Pinkbook). The American Academy of Pediatrics (AAP) says it best: â€Å"Mercury in all of its forms is toxic to the fetus and children and efforts should be made to reduce exposure to the extent possible to pregnant women and children as well as the general population† (AAP.Pediatrics- para 8, 2001).2 Phenoxyethanol is an anti bacterial agent being used as a replacement for the preservative Thimerosal. This industrial ingredient is used in perfumes, insect repellents, antiseptics, germicides and dyes. According to the Material safety data sheet( MSDS) 2 Phenoxyethanol is harmful if swallowed, inhaled or absorbed thru the skin. It may cause reproductive defects. EPA data sheets show chromosomal changes and genetic mutation effects in testing (Dunkin, 2008). Aluminum is added to vaccines in many forms.It works as an adjuvant to stimulate your immune system’s response to the virus in the vaccine. Aluminum has been found to be a dangerous neurotoxin th at has the ability to slip past the blood brain barrier (BBB) causing brain damage, Alzheimer’s disease, dementia, Parkinson’s disease, Lou Gehrig’s Disease (ALS), convulsions and coma. Human and animal studies have shown that Aluminum can cause nerve death (Mercola, 2011) Beta Propiolactone is an ingredient to assist with sterilizing the vaccine. It ranks high as a hazardous chemical on at least 5 federal regulatory lists.It has caused lymphomas and hepatomas after being injected into lab mice but its true effects on humans is not known. Due to animal study results the international Agency for Research on Cancer (IARC) has classified beta-Propiolactone as a possible carcinogen. MSDS sheet states toxic to liver and kidneys (Spectrum Laboratory Products). Ammonium Sulfate is a substance added to pesticides. It is unknown at this time as a carcinogen but it’s been suspected in gastrointestinal, liver, central nervous system (CNS) and respiratory system toxi city.On its MSDS sheet all hazards identification on carcinogen, mutatagenic (cellular mutations), teratogenic (fetal development) and developmental toxicity are listed as â€Å"not available†. (ScienceLab, MSDS) Formaldehyde is used as a preservative to stabilize the vaccine. It is used as a chemical to embalm dead bodies and preserve laboratory specimens. It has been classified as a known human carcinogen (cancer causing substance) and has been ranked as one of the most hazardous compounds on at least 8 federal regulatory lists.Formaldehyde is suspected of weakening the immune system and causing neurological system damage, genetic damage, metabolic acidosis, circulatory shock, respiratory failure, and acute renal failure (ARF) (Kendon, MSDS. 2004). Monosodium Glutamate (MSG) is used in vaccines as a stabilizer to prevent the vaccine from breaking down. MSG is also found in processed foods. MSG has been linked to mental retardation, autistic disorders, learning disorders, be havioral disorders, reproductive disorders, retinal damage and lesions on the brains of lab animals (Hoernlein,2012).Gentamycin Sulfate is an antibiotic added to protect the vaccine from bacteria during storage. Gentamycin sulfate has been linked to deafness, nervous system disorders, and kidney damage (Sciencelab. MSDS). Polymixin B, an antibiotic that is added to protect the vaccine from gram negative bacteria during storage, has side effects that include: targeting the central nervous system (neurotoxic) and causing kidney failure from acute tubular necrosis (Luther,2013). Any one of the above ingredients can have negative effects on the human body especially the very young , very old, pregnant, and the immunocompromised population.But the effects of all of these ingredients in one vaccine, that’s certainly toxic and at times can be lethal. A normal response to an influenza vaccine is localized redness, soreness, fatigue, mild fever, malaise for 1-3 days following a flu sh ot. Consider these adverse reactions listed by MClawers, a vaccine injury law firm The numbers of injuries resulting from the these vaccines were so undeniable that in October, 1988 Congress created the National Childhood Vaccine Injury Act, creating the National Vaccine Compensation Program(VICP).The VICP is a no fault alternative to the traditional tort system for resolving vaccine injury claims and provides compensation to people found to be injured by certain vaccines (all Influenza vaccines are covered). Every vaccine is taxed and the monies go into a compensation fund that is managed by US Court of Federal Claim, complete with vaccine courts, vaccine judges and attorneys who specialize in vaccine cases only. Monies are awarded to patients/families who have suffered from vaccine related injuries or deaths. In 2011, 200 million dollars were paid out in compensation for vaccine injuries.In 2012, there was 300 billion dollars available in the vaccine injury compensation trust fund . Overwhelming evidence of the numbers of people hurt by the toxic ingredients in the influenza vaccines and the incidence of adverse reactions, permanent injuries and deaths due to the toxic ingredients in the influenza vaccines continue to climb. Research has well documented these injuries and exposed the cause and effect of hazardous chemicals on our human population. A little knowledge can be frightening, meanwhile a lack of knowledge can be lethal. Be informed.

Thursday, August 15, 2019

Reconstruction After the American Civil War Essay

The civil war is considered by many the most important war that our country has endured. During the 5 year Civil War, not only did 620,000 men die, but our nation was left in ruins. It was necessary that our country be rebuilt from bottom up. Abraham Lincoln, said to be the brightest president of his time, had plans and ideas for reconstruction. Unfortunately, these plans were failed to be put in place due to the fact of his assassination on April 14, 1865. Throughout some of the most politically tough years our nation has experienced (1865-1877) lousy presidents were elected, plans and bills failed and succeeded, and struggles with civil rights were prominent everywhere. The United State’s hopeful plans for reconstructing and reuniting slowly faded until it was all gone The most important part of reconstruction would probably have to be the beginning, or where it all started. Reconstruction of our nation began unofficially in 1863 with Lincoln’s 10% plan. Because Lincoln wanted a reunited nation as easily and quickly as possible, he entailed that only 10% of the confederates in each state would have to swear allegiance in order for the state to be accepted back into the union. Because of the small number of confederates needed to swear allegiance, the radical republicans in congress were angered and proposed the Wade-Davis Bill. The Wade-Davis bill was intended to make congress responsible for reconstruction rather than the president, and also stated that the majority (not 10%) would have to swear allegiance in each state to be re-accepted into the union. For the good of the united states, not for selfish reasons, Lincoln vetoed (or declined) the bill. Because Lincoln was assassinated, the rest of his plans and hopes for reconstruction were n ever put to use, and his vice-president, Andrew Johnson, took the Presidential role. As reconstruction continued on, it brought many major achievements that greatly benefited our country. One of the greatest accomplishments of reconstruction was the Fifteenth Amendment. The Fifteenth Amendment stated that everyone has a right to vote no matter what â€Å"race, color, or previous condition of servitude† was. Because many whites didn’t like this, they wouldn’t cooperate with the amendment and would go as far as using violence to make blacks not vote. Because of this congress used the Enforcement Act of 1870 which entailed that federal governments would be able to punish those that were causing problems for the African Americans. Going along with the fifteenth amendment, reconstruction brought another achievement, a new life and society for former slaves. Supported by the government, former slaves were able to create new lives for themselves. Although it took hard work and dedication, African Americans were able to create schooling systems, churches and volunteer groups and fight against segregation. Former slaves were able to reunite with their families, and blacks were even finally allowed a spot in politics. The final greatest achievement of reconstruction was reuniting our country. Alabama, Arkansas, Florida, Louisiana, North Carolina, South Carolina, Tennessee, and the other four states all re-entered the union by 1870. By originally initiating reconstruction, this is what Lincoln was shooting for. Although they still had political and economic differences, they were once again a reunited nation. With every great movement and political plan, lasting effects come along with it. During reconstruction many things were accomplished, which means that our nation was faced with many positive and negative effects. Some of the positive effects included new opportunities for the common public and former slaves. For example, the common public was presented with its first public school system, new roads and railroads, as well as orphanages for children and institutions for the mentally ill. One of the negative effects of the war was the physically and economically drained south. After the war, the south was in extremely poor physical condition and most everything had to be either rebuilt or restored. This was going to cost sufficient amounts of money that the south did not have. To get the money, the taxes rose and the wages lowered. Many people were without family members that died in the civil war, and the south’s population had decreased drastically. Another lasting effect that reconstruction left on our nation was a dent on the farms and plantations in the south. Many farms and plantations in the south had been ruined. Poor whites and African Americans were at disagreement with rich whites on what the farm land should be used as. Rich whites wanted to restore the plantation system and poor whites and African Americans wanted to create small farms and subsistence farming. Labor was also down. With many men dying in the war, not as many people were left to work on the farms. When the plantations were reopened, many African Americans and poor whites worked on the plantations in exchange for housing, food, clothing, etc. Many good and bad effects were left on our nation from reconstruction. Although reconstruction was a good recovery point for our nation, it was slowly ended in 1877 for a collection of reasons. One of the largest problems was whites inflicting violence on African Americans to prevent them from exercising their rights. During reconstruction, Americans struggled with anti-black radicals such as the Ku Klux Klan. They destroyed buildings, personal property, harmed the African Americans, and even went as far as killing them. The goal of the Ku Klux Klan was to restore white supremacy. By 1880 terrorist groups had restored white supremacy in the south. Along with terrorist groups, political troubles were also in the nation’s way. General Ulysses S. Grant was elected president in 1872. Because Grant was inexperienced, he brought his friends into high positions and many scandals resulted. Because of all of the scandals, many people became irritated and more conflict arose. Last but not least, the United States was experiencing economic turmoil. The panic of 1873 was one of the main reasons that focus was turned away from reconstruction. A man named Jay Cooke invested a grand amount of money in railroads and not enough investors bought shares, causing Cooke to spiral into debt. Because of this Cooke’s banking firm (largest in the nation) went bankrupt. Many small banks and businesses closed and the stock market closed. Millions lost their jobs. Because of this five year depression, the focus of the country was turned away from reconstruction. Reconstruction lasted a solid 13 years that were filled with many great improvements and countless lasting effects on our country. While enduring many severe losses and challenges brought on by the Civil War, the United States pushed through and reunited. We will always be affected by this era in our country’s history. Throughout many failed presidencies, failed and passed bills and movements, and continuous struggles with civil rights, America became the country it is tod ay. From the achievements to the collapse of reconstruction, I believe it was completely necessary and left many lasting effects, good and bad, on our country.

Wednesday, August 14, 2019

Oman Cement Company

Oman Cement Company ( SAOG ) was formed in 1978. Rusayl Cement works was completed in 1983 with an one-year incorporate cement production capacity of 624,000 dozenss, of cement. In 1999 clinkering capacity expanded to a sum of 1.2 million dozenss per twelvemonth. The 2nd production line came on watercourse in mid 1998. Presently the company is working on spread outing the capacity of works signifier 1.26 MTS per twelvemonth to 1.70 MTS per twelvemonth by upgrading production line No. 1 and No. 2. The company installations are: 1- Computerized Fabrication Oman cement fabrication procedure is to the full computerized. This avoids major jeopardies in fabrication and needs less work force. 2- Central Laboratory The Quality Control is supported by cardinal research lab consisting of robotics, X-ray spectrometers, optical maser atom size analysers and computerized physical belongingss proving equipment. 3- Quality Management System and Environmental Management System oman cement Quality Management System is in conformity with the Quality Assurance Procedures of ISO 9001: 2000 enfranchisement. 4- Pollution Control. The Oman cement company produces many types of cement which are: 1- Ordinary Portland Cement: It is type I Portland cement. Its utilizations are strengthened concrete edifices, Bridgess and railroad constructions. The typical compound composings of this type are: 55 % ( C3S ) , 19 % ( C2S ) , 10 % ( C3A ) , 7 % ( C4AF ) , 2.8 % MgO, 2.9 % ( SO3 ) , 1.0 % Ignition loss, and 1.0 % free CaO. 2- Sulphate Resistant Cement: It is type V, is used where sulfate opposition is of import. Its typical compound composing is: 38 % ( C3S ) , 43 % ( C2S ) , 4 % ( C3A ) , 9 % ( C4AF ) , 1.9 % MgO, 1.8 % ( SO3 ) , 0.9 % Ignition loss, and 0.8 % free CaO. 3- Moderate sulfate resistant: It is type II cement. This type of cement can be used in constructions of considerable mass, such as big wharfs, heavy abutments, and heavy retaining walls. Its usage will cut down temperature rise particularly when the concrete is capable to hot conditions. Its typical compounds composing is: 51 % ( C3S ) , 24 % ( C2S ) , 6 % ( C3A ) , 11 % ( C4AF ) , 2.9 % MgO, 2.5 % ( SO3 ) , 0.8 % Ignition loss, and 1.0 % free CaO. 4- Oil Well Cement Oil good cement, used for oil Wellss grouting, normally made from Portland cement cinder or from blended hydraulic cements. It is used for cementing work in the boring of oil Wellss where they are capable to high temperatures and force per unit areas. Its typical compound composing is: MgO: 6.0 % SO3: 3.0 % Loss On Ignition: 3.0 % C3S: 48 % -65 % C3A: 3.0 % Insoluble Residue: 0.75 % C4AF+2C3A: 24 % Production methods: There are four phases to bring forth cement that Oman cement utilizing which are: 1- Preparation of the natural stuff at preies 2- Heating and chilling to bring forth cinder 3- Preparation of the cement 4- Cement wadding Procedure description: 1- Preparation stuff at preies The natural stuff contains of limestone ( 80 % of natural stuff ) , silica, aluminate and Fe ore. The preies located around the Oman cement works. At preies the natural stuffs are extracted with heavy equipments. Then the limestones are crushed with nomadic crushers connected with long conveyor belt to transport them to storage go throughing the car lab to analysis the samples with x-ray each two hours. After that the natural stuff are moved to reservoirs. Then they are moved with conveyer belt to the altogether factory to crunch the natural stuffs. Finally the crunching natural stuffs are moved to mixture reservoirs to acquire proper mixture before fed them to kiln. 2- Heating and chilling to bring forth cinder The natural stuffs are moved to impart, where heat exchange is occurred between these stuff and the raising hot gases from kiln, so the stuffs are separated from the gases. After that the stuff moved to calciner where the limestone is converted to calcium oxide, and so the calcined stuffs arefed to the kiln where the temperature about 1400 degree Celsius and so go forth from kiln to acquire cinder. Then the cinder leaves from kiln to air to cut down its temperature to 100 degree Celsiuss to be ready to be moved to cement factory. Kiln procedure 3- Preparation of cement The cinder that came out of the ice chest will be transported by the pail concatenation conveyer to the silo. The bag filter on the top of the silo is sized for the eating by the pail concatenation conveyer and thermic air enlargement in the storage. The cinder extracted from the silo is transported by belt conveyers to the cement proportioning. The gypsum is added to the cinder. Then the proportioned stuffs are conveyed via belt conveyer to cement crunching. Materials land by ball factory are transported centrifuge by pail lift. The harsh atoms separated return to ball factory for regrinding while the all right merchandise is collected by the bag filter behind the centrifuge and so conveyed to cement silo with an air slide and pail lift. Cement silos is used to hive away the cement. Cement factory 4-Cement wadding The cement from extraction systems under the cement silo is delivered to the buffer bin by air slide and the pail lift and vibrating screen, before being fed into each bagger. The bagged cement can be loaded straight or stored in depot temporarily. Machinery and Equipments: No. Name map 1 Limestone Crusher used in rock prey to oppress limestone 2 Clay crusher used in rock prey to oppress clay 3 Limestone Stacker Used to travel limestone to preblending reserve 4 Limestone reclaimer Used to take preblended mixture from preblending reserve 5 Coal and Fe ore Crusher Used to oppress linear stuffs 6 Coal and Fe ore Stacker Used to travel Fe ore to conveyor belt so to proportioning station 7 Coal & A ; Fe ore reclaimer Used for repossessing all linear stuffs and coal 8 Raw factory used for natural stuffs crunching and drying 9 Raw factory fan Used to set the factory recess temperature. 10 Preheater fan used to dry the natural stuffs 11 Preheater and precalciner Preheater used for preheating and partial decarbonation, and precalciner for calcination 12 Rotary kiln used to raise natural stuffs to a high temperature 13 Grate ice chest Used for slaking 14 Cement factory Used to crunch cement 15 Bag filter Used to roll up dust 16 Coal factory Used for coal drying 17 Bulk stevedore for truck Used to lade the majority 18 Cement bagger Used to pack cement merchandise Quality control system: The quality control section in the Oman cement company map is to supervise merchandise quality in every phase of production get downing with pull outing the limestone from the prey till the phase of cement Millss, by taking samples and analysis them. 1- The computing machine and x-ray analysis: The mechanization lab consists of automaton, x-ray spectrometers, optical maser atom size analyser and computerized physical belongingss. The samples will be taken by an automatic sampling station from a point between the altogether factory and homogenising silo and so transported manually to the cardinal car lab, where it will be semi-automatically prepared and sent to an X-Ray analyser. The consequences analyzed will be sent to a proportioning computing machine. The computing machine will cipher the ratio of natural stuffs and direct out the set value to constant feeder harmonizing to the chemical composings and natural repast faculty required. 2- Physical analysis: To prove the choiceness, soundness, puting clip, strength, specific gravitation, heat of hydration and loss on ignition of the cement to accomplish the American specifications demand. Care process: The section maps are: -Checking all machinery and equipments are work decently. -Scheduling and be aftering for preventative care, prognostic care. – Coordinating with all sections for day-to-day job. – Planning, organizing of preventative and breakdown activities for accomplishing high works handiness to run into production mark. The process that the Oman cement follows in instance of dislocation, preventative and shutdown care are: 1. Breakdown care In instance of any breakdown care in the production section, they give information sing the dislocation to the care section, and care workers are sent to the production works to repair machine failures. 2. Preventive care here, a squad of care workers is sent straight to the production workss to look into out whether there is any failure in the machinery or non. 3. Shutdown care When the works is shut down the employees in the production section sent a missive to the care section and consecutive stairss are taken by care section to work out the failures. The works closure occurs every 6 month in March and September. The procedure of operating and monitoring production lines and machines immediately, so they can watch the failure and harm of the machines and equipments to mend them or replace them. Technical direction The proficient direction duty is to oversee all the mechanical, electrical things and keep the assorted equipments and everything that related to maintenance process, and this direction divided in many subdivisions: a- The machine subdivision The duty of this subdivision is prepare exigency and planning agenda and make it to all the equipments and describe it to name the unusual failure and hole it. Inspect the machinery, cheque with drawings and specifications and rectification. It contacts with shop subdivision to supply the needed replacing parts and besides contacts with other subdivisions to keep the equipments at the workshop. At the workshop they fix the equipments in exigency conditions, look into the equipments if they work decently and routinely, takes care the equipments and aid to clean them. B ) The machine operation subdivision The duty of this subdivision manufacture the replacing parts, make an order outside the company to acquire new parts, lathe the machine parts the required the workshops. degree Celsius ) The immediate machine care subdivision The duty of this subdivision is to look into and repair the production lines. vitamin D ) The electrical subdivision The electricity section is responsible to mend and guarantee the continuance of the work of all electrical and electronic equipment and preciseness instruments on the production line and besides supervises contact with other subdivisions to that the electricity working decently.